ir6570 need help

[tee2520]

10612818_695468133863444_5429728180139519747_n.jpg10409568_695485937194997_183443751089250416_n.jpg

Left paper is copied form plate grass and the right paper is copied from DADF. It is only half image. Please advice. Thanks

[teckat]

Re: ir6570 need help

[ATTACH=CONFIG]26154[/ATTACH][ATTACH=CONFIG]26155[/ATTACH]

Left paper is copied form plate grass and the right paper is copied from DADF. It is only half image. Please advice. Thanks

-------------------------
LA1 scanning lamp > checked for condition

u ran a blank page from DADF ?



U have good blanking (non-image on edges /

Pre-Exposure lamps can be turned on in service mode for a quick test.
Below is the path in service mode, to turn on the pre-exposure lamp.
Function > Misc-P > PRE-EXP

what are >Copier > Display > DPOT readings ??

DPOT-K
VL1T
VL1M
VL2M
VDT
VDM
VL2M-P
VL1M-P
VL1T-P
VDM-P
VDT-P

[teckat]

Re: ir6570 need help

[ATTACH=CONFIG]26154[/ATTACH][ATTACH=CONFIG]26155[/ATTACH]

Left paper is copied form plate grass and the right paper is copied from DADF. It is only half image. Please advice. Thanks

-------------------------
Prints are OK


LA1 scanning lamp > check for condition & connection




U have good blanking (non-image on edges /


what are >Copier > Display > DPOT readings ??

DPOT-K
VL1T
VL1M
VL2M
VDT
VDM
VL2M-P
VL1M-P
VL1T-P
VDM-P
VDT-P