[Misc] Canon iR Advance C5030 Fax

[AhLeong77]

Hi there, is there any option that I can pro-long the Fax Tone on Canon iR Advance C5030?? Thanks in advance!!

[teckat]

Re: Canon iR Advance C5030 Fax

Hi there, is there any option that I can pro-long the Fax Tone on Canon iR Advance C5030?? Thanks in advance!!

-----------------------

u mean u want to add a Pause Prior to Dialing a Destination Fax Number

[AhLeong77]

Re: Canon iR Advance C5030 Fax

-----------------------

u mean u want to add a Pause Prior to Dialing a Destination Fax Number

Hi Teckat, thank you so much!!

Let begin like this, if there is a incoming fax, maybe after 2 tones then it will automatically received the fax. What if I wish it to rang maybe 7 to 10 tones before received the fax. As for your information, the user use this as a fax receiver and phone also. Any idea??

[teckat]

Re: Canon iR Advance C5030 Fax

Hi Teckat, thank you so much!!

Let begin like this, if there is a incoming fax, maybe after 2 tones then it will automatically received the fax. What if I wish it to rang maybe 7 to 10 tones before received the fax. As for your information, the user use this as a fax receiver and phone also. Any idea??

====================
in iRADVC
User Mode > Function Settings > Receive/Forward >Fax Settings
Select RX Mode

* Default Setting
Auto RX*, Fax/Tel Auto Switch
Fax/Tel Auto Switch
• Ring Start Time: 0 to 30 sec (8 sec*)
• Ring Time: 15 to 300 sec (17 sec*)
• F/T Switch Action: End, Receive*
• Outgoing Message: On, Off*



IN OTHER PRINTERS> Usually set this way------------------------------
The incoming ring count can be set by editing the Fax Service Mode accordingly:
1. Enter the general Service Mode, then Fax Service Mode, as required.
2. Select NCU (or #4B NCU).
3. Select ‘8. Auto RX’.
4. Highlight or choose ‘007’. The default setting will be 02.
5. Change the value as required.

Note: Setting the ring count to 4 or more rings may cause the transmitting device to time-out, if the connection time exceeds 30 - 35 seconds (T1 timer).

[AhLeong77]

Re: Canon iR Advance C5030 Fax

====================
in iRADVC
User Mode > Function Settings > Receive/Forward >Fax Settings
Select RX Mode

* Default Setting
Auto RX*****




IN OTHER PRINTERS> Usually set this way------------------------------RXThe default setting will be 02.
5. Change the value as required.

Note: Setting the ring count to 4 or more rings may cause the transmitting device to time-out, if the connection time exceeds 30 - 35 seconds (T1 timer).

Thanks again, Teckat.

You are my savior!! Lastly one more question. Is this can be apply to all Canon range copier such as iR-2525, iR-4570 and so on??

And really lastly, THANKS AGAIN!! Hope you have a nice day......................

[teckat]

Re: Canon iR Advance C5030 Fax

Thanks again, Teckat.

You are my savior!! Lastly one more question. Is this can be apply to all Canon range copier such as iR-2525, iR-4570 and so on??

And really lastly, THANKS AGAIN!! Hope you have a nice day......................

--------
Believe the bottom NCU procedure is used.! !!