E 733 - 0001 after jam on Canon iR 7105.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ingranaggio_rotto
    Trusted Tech

    250+ Posts
    • Oct 2010
    • 274
    #1

    E 733 - 0001 after jam on Canon iR 7105.

    Good evening every body !

    E 733 - 0001 : I have this error code after each reset of a paper jam on Canon iR 7105.

    I replaced the DC Con, but I have not solved.

    Any suggestions?

    Greetings.
    Tags: None
    • laitang
      Senior Tech

      500+ Posts
      • Nov 2012
      • 627
      #2
      Re: E 733 - 0001 after jam on Canon iR 7105.

      Canon ir7105_E733.JPG

        Comment

        • Herrmann
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2006
          • 792
          #3
          Re: E 733 - 0001 after jam on Canon iR 7105.

          after each reset of a paper jam
          Maybe the jam results from the E733, because in case of Error, the mashine stops immedeatly and this leads to false interpretation as jam. Leave the DC alone and check connection between Reader and Host mashine. second check Power supply of reader.
          If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: E 733 - 0001 after jam on Canon iR 7105.

              Originally posted by Ingranaggio_rotto
              Good evening every body !

              E 733 - 0001 : I have this error code after each reset of a paper jam on Canon iR 7105.

              I replaced the DC Con, but I have not solved.

              Any suggestions?

              Greetings.


              ------------;-\
              check the wiring to sensor PS9 in the Fixing/Feeding Frame Assembly. Replace the wiring to PS9 if it is damaged~~~


              Check the fuser roller bearings and the fuser drive for wear.
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • Ingranaggio_rotto
                  Trusted Tech

                  250+ Posts
                  • Oct 2010
                  • 274
                  #5
                  Re: E 733 - 0001 after jam on Canon iR 7105.

                  Hello everyone!

                  Thanks for the suggestions.

                  I will do these tests hoping to solve the problem!

                  Good night!

                    Comment

                    Previous template Next
                    Working...