IR3300 zig zag copy

[cokwax]

I know someone else posted this sometime, but on my 3300 the problem is random. sometimes machine normal, other times zigzag copy. wondering what the problem is. Laser unit was never opened. I recently opened it to inspect & clean but the problem persisted. Any ideas?

[teckat]

Re: IR3300 zig zag copy

I know someone else posted this sometime, but on my 3300 the problem is random. sometimes machine normal, other times zigzag copy. wondering what the problem is. Laser unit was never opened. I recently opened it to inspect & clean but the problem persisted. Any ideas?

----------------------

zigzag copy / post image

u mean offset blur of text/image

glass copy & PC prints ?

[Brian8506]

Re: IR3300 zig zag copy

If you get waviness in lines of text, it's probably a bad laser. That's always been my experience on that series

[teckat]

Re: IR3300 zig zag copy

I know someone else posted this sometime, but on my 3300 the problem is random. sometimes machine normal, other times zigzag copy. wondering what the problem is. Laser unit was never opened. I recently opened it to inspect & clean but the problem persisted. Any ideas?

image made from the glass and test prints are wavy from the lead edge to the trail edge.
replace Laser Scanner Assembly part number is FG6-5633-000.

[cokwax]

Re: IR3300 zig zag copy

Replaced Dev cylinder and primary Charging roller, problem gone.