Printing Help In Canon Ir C3200

[regalcopy]

I Have Canon Irc3200, Printer Kit A1. I Can Scan, But Can't Print. Boot Rom Is N & Shows Ps/pcl As Well.

I Doubt 2 Boards On The Machine.
1) The Main Board Containing Hard Disk.
2) The Small Vertical Board (SURF BOARD) With Processor.

I Don't Known What Exactly Is The Problem.

Can I Print After Taking C1 Kit Even If My Board(with Hard Disk) Might Be Bad.

Pls Guide Me
Regards

[alex@wocltd.com]

have you got a surf board in the machine?

are you still trying to convert clc to irc?

do you have i/f board in m/c?

[regalcopy]

Ir C3200 Printing Problem

I Have Surf Board In Machine, When I Put This In Machine I Can Scan But No Print.

Any Help Would Be Appreciated

[alex@wocltd.com]

so you have surf board & 'n' boot rom=you should be able to print

assume your using just basic pcl5 driver?

assume you have tried different computers?

have you done mmi clear?

at worse clear everything(so you start from 'box fresh')

assume with above interface settings are set correctly