Canon V1 Staple Position

[Brian8506]

I'm in the field and don't have documentation with me. Would like to save a trip. Trying to adjust staple position for corner stapling on 7086 with V1 finisher. I think it's with the dip switches. Any help would be great otherwise I come back Monday

[Brian8506]

Re: Canon V1 Staple Position

Thought I had the book on this. I don't. Anybody know the procedure?

[vigour]

Re: Canon V1 Staple Position

4.3.2.3 Adjusting the Stapler Position
0011-7484 Go through the following steps if you have replaced
the stapler unit found in the intermediate
handling tray assembly:
1) Mark the position [1] of the stapler unit before
replacement.
2) Mount the new stapler unit [2] with reference
to the marking [1], fixing it in place using 2
screws [3].

If stapler position drifts intermittentty most likely you need to replace the stapler shift mount assembly fm2-6363