I am trying to locate where the PCL or Postscript Options would plug in on the board? Would these installed options show up on the screen under the configuration check?
-
-
Re: Canon C2020 PC? Postscript
=======================
imageRUNNER ADVANCE C2000 Series will include UFR II standard printing capabilities, as well as an optional PCL Printer Kit and an optional PS Printer KitPCL Printer Kit-AF1 = Purchase LMS activation required
PS Printer Kit-AG1 = Purchase LMS activation required
Allowing LMS Kits and MEAP Applications to be Installed via the Content Delivery System (CDS)
To turn on the CDS MEAP installer option change the following setting in service mode:
Copier > Option > FNC-SW > CDS-MEAP; change from 0 to 1 to allow MEAP content delivery.
================================================== =====================
If you did not receive a CD/DVD for a Canon LMS based kit, software, or meap application you purchased you can download the software associated with your LAN at the following address.
http:\\www.canon.com/fau/downloads
The Content Delivery Site will prompt you for your LAN number and will allow you to download only the software that is linked to that LAN.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment