canon 6055- drum shaft

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bobe
    Technician
    • Oct 2011
    • 38

    #1

    canon 6055- drum shaft

    Hello,

    I have a canon 6055 with copy quality issue (was charge unit) . I took out the drum unit clean it put it back but now is stuck . Was someone in the same situation. Thanks
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: canon 6055- drum shaft

    Originally posted by bobe
    Hello,

    I have a canon 6055 with copy quality issue (was charge unit) . I took out the drum unit clean it put it back but now is stuck . Was someone in the same situation. Thanks



    Stuck >not turning, cannot remove unit, ?
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • laitang
      Senior Tech

      500+ Posts
      • Nov 2012
      • 627

      #3
      Re: canon 6055- drum shaft

      Read carefully below document
      Attached Files

      Comment

      • bobe
        Technician
        • Oct 2011
        • 38

        #4
        Re: canon 6055- drum shaft

        thanks. Is not because of charge unit. I know how to take it out, but now seems to be stuck inside. I removed developer unit, charge unit, all 3 screws on drum unit but stiil wont come out. Good news for me drum unit was changed not long time ago and life time is 1mil copies. But i have to figure out why is not coming out

        Comment

        • Dutchman
          Technician

          50+ Posts
          • Jan 2011
          • 58

          #5
          Re: canon 6055- drum shaft

          Hi, this might be a silly question. You mentioned that you removed the three screws on the unit but did you remove the screw on the drumshaft itself.

          Comment

          • bobe
            Technician
            • Oct 2011
            • 38

            #6
            Re: canon 6055- drum shaft

            2 above and 1 shaft=3 screws

            Comment

            Working...