ip 1135

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wassem
    Trusted Tech
    • Aug 2012
    • 166
    #1

    [Error Code] ip 1135

    hi

    i have E015-1031

    it isn't mentioned in service manual that i have (version 5)

    thanks in advance
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: ip 1135

      Originally posted by wassem
      hi

      i have E015-1031

      it isn't mentioned in service manual that i have (version 5)

      thanks in advance
      ================================================

      E015-1031. The subcode is not listed in the service manual.

      This error code is defined as an error in the Delivery Switch Motor (M31). The copier is also producing a jam code of 011E.

      Workaround :       It was discovered that motor M55 was binding, causing the E015-1031, and jam code 011E. The issue was resolved by loosening the gear box, and re-tightening screws at jam removal knob D8 in the Reverse Assembly. The area of the work is shown below:
      one.JPGone.JPGone.JPG
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • prismtech
          Trusted Tech

          Site Contributor
          100+ Posts
          • May 2014
          • 199
          #3
          Re: ip 1135

          Originally posted by teckat
          ================================================

          E015-1031. The subcode is not listed in the service manual.

          This error code is defined as an error in the Delivery Switch Motor (M31). The copier is also producing a jam code of 011E.

          Workaround :           It was discovered that motor M55 was binding, causing the E015-1031, and jam code 011E. The issue was resolved by loosening the gear box, and re-tightening screws at jam removal knob D8 in the Reverse Assembly. The area of the work is shown below:
          [ATTACH=CONFIG]26724[/ATTACH][ATTACH=CONFIG]26725[/ATTACH][ATTACH=CONFIG]26726[/ATTACH]
          Hey Teckcat!

          I wonder how binding way down at m55 could effect m31 up top at the delivery switch? I'm dealing with this right now in a 1110.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: ip 1135

              Originally posted by prismtech
              Hey Teckcat!

              I wonder how binding way down at m55 could effect m31 up top at the delivery switch? I'm dealing with this right now in a 1110.

              have no idea/ pic from canon

              what is Jam Code
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • prismtech
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • May 2014
                  • 199
                  #5
                  Re: ip 1135

                  Originally posted by teckat

                  have no idea/ pic from canon

                  what is Jam Code
                  My jam codes clearly indicated the paper was taking the wrong path from the diverter flap. Ie. trying to duplex a single sided sheet.

                  My fix was replacing the entire flap assembly. Bad solenoid I guess.

                  Didn't have to go near the bottom components as pictured... but will keep it in mind for the next time I see this.

                  Thanks!

                    Comment

                    Previous template Next
                    Working...