Canon iR 2270 making waves on A3 paper

[lazo7]

Hi everyone!
I have a problem with couple of Canon iR2270. When you print or copy on A4 paper, everything works fine, but when you try to copy or print on A3 paper, on allmost every sheet i have waves at the end of the paper. You can see it in attachment. If anybody had a simmilar problem, please help.

[ernesto]

Re: Canon iR 2270 making waves on A3 paper

Hi,

you can try this :

MODE SERVICE Level 2: copier > adjust>fixing> fx-fl-sp (+3)

http://www.copytechnet.com/forums/canon/63197-wrinkled-paper-ir4570.html?highlight=ir+4570

ALL THE BEST

[teckat]

Re: Canon iR 2270 making waves on A3 paper

changing the value of FX-FL-SP in service mode LEVEL 2 to +3.

To change the value of FX-FL-SP in service mode, perform the following.

Service Mode> to Service Mode LEVEL 2 > COPIER > ADJUST > FIXING>FX-FL-SP


Note:
The definition for FX-FL-SP is as follows:

Use it to enter a fine adjustment value for the fixing film speed when plain paper is used. Make a fine adjustment of the target control speed for the fixing film speed when plain paper is used.
Setting range: -3 to 3 (Default: 0) (Unit: ms)

[DAG COPIERS & COMPUTERS]

Re: Canon iR 2270 making waves on A3 paper

changing the value of FX-FL-SP in service mode LEVEL 2 to +3.

To change the value of FX-FL-SP in service mode, perform the following.

Service Mode> to Service Mode LEVEL 2 > COPIER > ADJUST > FIXING>FX-FL-SP


Note:
The definition for FX-FL-SP is as follows:

Use it to enter a fine adjustment value for the fixing film speed when plain paper is used. Make a fine adjustment of the target control speed for the fixing film speed when plain paper is used.
Setting range: -3 to 3 (Default: 0) (Unit: ms)

Exactly! I had same problem in a iR3300, did a DCON CLEAR, and re-entered values from its 'birth certificate'. No problem ever since.

[wellrajive]

Re: Canon iR 2270 making waves on A3 paper

[QUOTE=lazo7;441544]Hi everyone!
I have a problem with couple of Canon iR2270. When you print or copy on A4 paper, everything works fine, but when you try to copy or print on A3 paper, on allmost every sheet i have waves at the end of the paper. You can see it in attachment. If anybody had a simmilar problem, please help.



hello problem with only A3 size paper resently i resolved this issue... chnged PAPER DELIVERY ASSEMBLY -> FC5-0800-000 1 ROLLER, PAPER DELIVERY ...sorry my english is not good...

[lazo7]

Re: Canon iR 2270 making waves on A3 paper

Thank you all for helping me. After changing the values in service mode, everything worked well.