Canon ir7105 E110

[mramlawi]

hello to all ,
Canon IR7105 giving me E110 i know that its a laser problem but i wonder that this error appear from time to time some times when i turn the machine on ,some times when the machine is ready and want to make a copy it give e110 ,i asked my friends they told me its a beam Problem is theres any solution for this ?i also made sure that the Corona's Door is open also the Door switch is ok also .

regards,

PM:if i want to change the beam how much it cost ?

[teckat]

Re: Canon ir7105 E110

hello to all ,
Canon IR7105 giving me E110 i know that its a laser problem but i wonder that this error appear from time to time some times when i turn the machine on ,some times when the machine is ready and want to make a copy it give e110 ,i asked my friends they told me its a beam Problem is theres any solution for this ?i also made sure that the Corona's Door is open also the Door switch is ok also .

regards,

PM:if i want to change the beam how much it cost ?

---------*
U want to buy a Laser Beam__:-$

How about the Laser Unit-
Canon FM2-5449-020

Intermittent e110 can be from front door switch Magnet Catch is not properly holding the front door closed\ because of printer vibration

[Canuck]

Re: Canon ir7105 E110

Probably flakey laser diode...replace laser driver like stated by teckat. I had one though that was caused by interlock switch for bypass tray door