[Error Code] ir 5050 Technician service password

[bilimbique]

Hello : I live in Merida, Mexico have a go canon 5050 , I requested the password to enter the service mode , I have no password , can you help me?
thank you

[teckat]

Re: ir 5050 Technician service password

Hello : I live in Merida, Mexico have a go canon 5050 , I requested the password to enter the service mode , I have no password , can you help me?
thank you

---------------------------
imageRUNNER 5050 / 5055 / 5065 / 5075

TRY THE DEFAULT # 11111111

To enable the Service Mode Password go to (Service Mode Level 1) COPIER>OPTION>BODY> and change PSWD-SW to a 1.

To change the password from the default of 11111111, go to (Service Mode Level 2) COPIER>OPTION>BODY>SM-PSWD and enter in the 8 digit password you would like to use.


OR---------------imageRUNNER 5050 / 5055 / 5065 / 5075

The Service Mode Password can be reset with the Service Support Tool.
To reset the password:
1) Boot the imageRUNNER into Download Mode.
2) Launch the Service Support Tool.
3) Select "iR5075/_V2/_V3" from the Model List, then click on "Single", and then click on "Start".


4) Click on the "Init SMWP" Button.

5) Click on the Initialize Button.

6) Click the "OK" Button. The Service Mode Password has now been reset.

[bilimbique]

Re: ir 5050 Technician service password

Thank you very much, it's been a great help. thank you fix my copier.
apology for the answer but my English is limited. regards

[teckat]

Re: ir 5050 Technician service password

Thank you very much, it's been a great help. thank you fix my copier.
apology for the answer but my English is limited. regards

The Dude.jpgthanks, good luck

[Mannu6003]

Re: ir 4225i Technician service password

I have canon imagerunner advance 4225i when I enter in service mode there is Service Technician password ...please help me how can I remove that ...already tried 11111111 but not working. Please anyone can help me🙏

[teckat]

Re: ir 4225i Technician service password

I have canon imagerunner advance 4225i when I enter in service mode there is Service Technician password ...please help me how can I remove that ...already tried 11111111 but not working. Please anyone can help me🙏

---

user name and password (Administrator / 7654321)

7654321

or 1836671

or

The steps for clearing

1. Load system software on a USB thumb drive

2. Power 'OFF' the machine

3. Insert USB thump drive into USB port on the display

4. Re-power the machine holding down "28", to enter Download Mode

5. Select "8" to access Download Menu 2

6. Select "0" to Execute?/ (OK)

7. Select "1" Service Mode password clear

8. Select "0" to Execute?/ (OK)

10. Please any key

11. Select [C]: the Clear Key which will return to Main Menu

12. Select RESET Key

13. Select "0" to Execute?/ (OK)

14. Display indicates: "Remove USB Device then Shutdown"

15. Select RESET Key again after removing USB

(NOTE: After you press the RESET button - you will notice the display screen will go

black/blank however, the Green Power light will remain ON.)

(NOTE

: It seems safe to execute step number 16.)16. Power OFF then ON the Main Switch