Canon C5030 OP Panel Wiring

[Draco]

Hey all,

Having an issue tracking down the part numbers for the wiring harness that runs from the back of the OP Panel Assembly to the Control Boards in the back of the machine. I have checked both the SM and Extranet without any real success. The parts manual does show multiple harnesses in Figure 130, however only one part number is showing and it does not look like the harness I need, and no part numbers for the others it shows. Any assistance in the matter will be greatly appreciated. Thnx

[Draco]

Re: Canon C5030 OP Panel Wiring

Hey all,

Having an issue tracking down the part numbers for the wiring harness that runs from the back of the OP Panel Assembly to the Control Boards in the back of the machine. I have checked both the SM and Extranet without any real success. The parts manual does show multiple harnesses in Figure 130, however only one part number is showing and it does not look like the harness I need, and no part numbers for the others it shows. Any assistance in the matter will be greatly appreciated. Thnx

Ok, finally found the part number, its in the "Machine Rear Plate 2" section of the parts manual just incase someone else ends up having the same issue trying to locate it.