E 061 0001/ 0004 on iRADVC7055

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ingranaggio_rotto
    Trusted Tech

    250+ Posts
    • Oct 2010
    • 274
    #1

    E 061 0001/ 0004 on iRADVC7055

    Hi to everybody !

    Hi to everybody!
    I have this code error on a iRADVC 7055: E 061 0001 or E061 0004.
    The life of the drum K is about 90.000 prints.
    I changed the corona wire, the grid, clean the laser glass;
    I executed the DPC mode, but the code remains.
    I off the potential control.
    But the problem remains !


    Help me !
    Tags: None
    • Luther
      Senior Tech

      500+ Posts
      • May 2006
      • 682
      #2
      Re: E 061 0001/ 0004 on iRADVC7055

      Make sure laser shutter is working properly and not stuck half way
      Laser Shutter is activated by the pin on the Primary Fan Duct Assembly
      The pin actuates the shutter through the opening in the Machine Front Plate
      Check the shutter operation and the pin on the Primary Fan Duct Assembly.
      If the pin is broken, it should be replaced. The pin can be replaced by replacing the Primary Fan 2 Duct.
      Duct, Primary Fan 2 FC6-3540-000.....per tekat 9-13-2014

        Comment

        • vigour
          Service Manager

          1,000+ Posts
          • Aug 2010
          • 1038
          #3
          Re: E 061 0001/ 0004 on iRADVC7055

          Originally posted by Luther
          Make sure laser shutter is working properly and not stuck half way
          Laser Shutter is activated by the pin on the Primary Fan Duct Assembly
          The pin actuates the shutter through the opening in the Machine Front Plate
          Check the shutter operation and the pin on the Primary Fan Duct Assembly.
          If the pin is broken, it should be replaced. The pin can be replaced by replacing the Primary Fan 2 Duct.
          Duct, Primary Fan 2 FC6-3540-000.....per tekat 9-13-2014

          I think you mean IR7105 , there is no Primary Fan Duct on this model

            Comment

            • Dutchman
              Technician

              50+ Posts
              • Jan 2011
              • 58
              #4
              Re: E 061 0001/ 0004 on iRADVC7055

              Originally posted by Ingranaggio_rotto
              Hi to everybody !

              Hi to everybody!
              I have this code error on a iRADVC 7055: E 061 0001 or E061 0004.
              The life of the drum K is about 90.000 prints.
              I changed the corona wire, the grid, clean the laser glass;
              I executed the DPC mode, but the code remains.
              I off the potential control.
              But the problem remains !


              Help me !
              E061-0001 relates to the primary shorting or not connected or the black drum is not rotating. I would replace the whole primary unit if the drum does rotate.

              E061-0004 is black laser power shortage error. As you have cleaned the laser glass already I would have a look at the power connection to the laser see if cables are shorting, failing that replace the black laser or the laser interface PCB.

                Comment

                • Ingranaggio_rotto
                  Trusted Tech

                  250+ Posts
                  • Oct 2010
                  • 274
                  #5
                  Re: E 061 0001/ 0004 on iRADVC7055

                  I Substituted the potential control assembly (PCB) and the drum (50% of life), and I solved the code error !

                    Comment

                    Previous template Next
                    Working...