Ir-1730i boot up freeze

[jose antonio]

Hi,
This canon Ir-1730i when powering up there is initial rotation on motors and drives, then the loading bar on the control panel freezes in the middle and stays like that.
Can,t see any helpful hint in the service manual.
Any hints or ideas very much appreciated.
Jose Antonio.

[teckat]

Re: Ir-1730i boot up freeze

Hi,
This canon Ir-1730i when powering up there is initial rotation on motors and drives, then the loading bar on the control panel freezes in the middle and stays like that.
Can,t see any helpful hint in the service manual.
Any hints or ideas very much appreciated.
Jose Antonio.

=================

REMOVE MEMORY> CLEAN ENDS> RE-SEAT

[laitang]

Re: Ir-1730i boot up freeze

Reload firmware:
iR-1750_WLaa7301

[jose antonio]

Re: Ir-1730i boot up freeze

=================

REMOVE MEMORY> CLEAN ENDS> RE-SEAT

Already did but din't help, i'am tinkling about system software maybe

[jose antonio]

Re: Ir-1730i boot up freeze

Reload firmware:
iR-1750_WLaa7301

I,am waiting for a colleague of mine to get me the software, if he can get it for me, only don't know how to reload, can this be done without the machine powering on?

i,am new to this canon model.

Thanks!

jose antonio

[laitang]

Re: Ir-1730i boot up freeze

....i,am new to this canon model.

Thanks!

jose antonio

A newbie of canon cannot reload firmware!
Call a technician!

[jose antonio]

Re: Ir-1730i boot up freeze

A newbie of canon cannot reload firmware!
Call a technician!

Iam not a newbie with canon, only new to this particular model.
I am a certified canon and xerox technician.
I have been loading software on many different models, canons and xerox.

[teckat]

Re: Ir-1730i boot up freeze

Iam not a newbie with canon, only new to this particular model.
I am a certified canon and xerox technician.
I have been loading software on many different models, canons and xerox.

**********
See link on google😉

CANON IR1730/40/50 SERVICE MANAUL - Scribd

https://www.scribd.com/.../115733699

[teckat]

Re: Ir-1730i boot up freeze

[QUOTE=teckat;446392]**********

See link on google😉 CANON IR1730/40/50

https://www.scribd.com/.../115733699

Or search Scribd

[jose antonio]

Re: Ir-1730i boot up freeze

[QUOTE=teckat;446393]

**********

See link on google😉 CANON IR1730/40/50

https://www.scribd.com/.../115733699

Or search Scribd

Already have the manual.. Thanks!

[teckat]

Re: Ir-1730i boot up freeze

[QUOTE=jose antonio;446404]

Already have the manual.. Thanks!

______
Should have directions on using the UST to install firmware.
I can post a video on youtube later.

[jose antonio]

Re: Ir-1730i boot up freeze

[QUOTE=teckat;446418]

______
Should have directions on using the UST to install firmware.
I can post a video on youtube later.

Yes there are directions, but the machine needs to be powered on for the download, and it doesn't go past the freeze screen.

[teckat]

Re: Ir-1730i boot up freeze

[QUOTE=jose antonio;446404]

Already have the manual.. Thanks!

[QUOTE=jose antonio;446431]

Yes there are directions, but the machine needs to be powered on for the download, and it doesn't go past the freeze screen.

---------
Give this a try,

If u have the G3fax installed, disconnect it's board connections inside printer> then power up printer.

[teckat]

Re: Ir-1730i boot up freeze

[QUOTE=jose antonio;446431]

Yes there are directions, but the machine needs to be powered on for the download, and it doesn't go past the freeze screen.

User Support Tool Instructions for iR1730 SERIES