IR6570 adf error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 813200217
    Technician
    • Oct 2014
    • 51

    #1

    IR6570 adf error

    I have two ir6570
    i don't know why
    suddenly my two machines cannot use adf anymore
    when i press start button to copy from adf feeder
    the message appear
    "Open the feeder cover (if any originals are left in the original feeding tray, remove them)"

    is that something wrong with the settings.

    what is docst ?
    what is la speed ?



  • tenatal
    Technician
    • Aug 2011
    • 35

    #2
    Re: IR6570 adf error

    did u clear dc-con or r-con ?

    in some ir6570 after clear the above two, the adf shows error.

    solution in some simple steps -

    fresh start the machine.

    go in service mode and then COPIER > FEEDER > FUNCTION

    SENS-INT press OK

    come out of service mode, restart machine.

    now check adf.

    Comment

    • Canuck
      Tech Specialist

      1,000+ Posts
      • Nov 2007
      • 1713

      #3
      Re: IR6570 adf error

      Probably the infamous 0094 jam code...see other post
      Last edited by Canuck; 11-27-2014, 09:53 PM.

      Comment

      • clommot
        Technician
        • Jan 2013
        • 24

        #4
        Re: IR6570 adf error

        I had this many times since our client commonly using the machine in dusty rooms. Try cleaning the feeder paper sensor. We solve them many times.

        Comment

        • 813200217
          Technician
          • Oct 2014
          • 51

          #5
          Re: IR6570 adf error

          Originally posted by clommot
          I had this many times since our client commonly using the machine in dusty rooms. Try cleaning the feeder paper sensor. We solve them many times.
          Where is exactly the feeder paper sensor?

          Comment

          • 813200217
            Technician
            • Oct 2014
            • 51

            #6
            Re: IR6570 adf error

            Originally posted by tenatal
            did u clear dc-con or r-con ?

            in some ir6570 after clear the above two, the adf shows error.

            solution in some simple steps -

            fresh start the machine.

            go in service mode and then COPIER > FEEDER > FUNCTION

            SENS-INT press OK

            come out of service mode, restart machine.

            now check adf.
            yes, i clear them.
            already try that service mode..
            but it still error

            Comment

            • g.jacks@alphacopy.com.au
              Technician

              Site Contributor
              • Jul 2014
              • 6

              #7
              Re: IR6570 adf error

              DOC-ST is Document Stop. Leading edge registration of paper
              LA-SPEED is Read speed of document over the CIS Lamp.

              Sounds weird, but disconnect the RDF's from the Scanner electrically ant then turn the MFD's on. Basically using it as if it had no RDF. Then reconnect them again. Also remove/refit ALL connections to the RDF controller.

              Why are both MFD's showing the same problem at the same time. Has someone copied sticky labels/receipts in them and a piece is left over a sensor?

              Food for thought.

              Comment

              • Canuck
                Tech Specialist

                1,000+ Posts
                • Nov 2007
                • 1713

                #8
                Re: IR6570 adf error

                I repeat...read my other post for 0094 jam

                Comment

                • 813200217
                  Technician
                  • Oct 2014
                  • 51

                  #9
                  Re: IR6570 adf error

                  my technician solve my two ir6570 problem...
                  he cleans the adf...
                  it just too many dust in there..
                  and it works

                  Comment

                  Working...