[Error Code] IPF8300 2F-48

[Guest]

With updated firmware, IPF8300 2f-48 error code corrected after both heads replaced. Now, 47 days later, error code is back. After replacing the carriage PCB as next step, is it possible to use the 2 (almost new) 47 day old heads ? How if special steps are needed ? Anything else to try before the carriage PCB ?

[mramlawi]

Re: IPF8300 2F-48

actually i changed all the Carriage unit assembly and the 2 heads the plotter working very good with me

[silviu_25]

Re: IPF8300 2F-48

With updated firmware, IPF8300 2f-48 error code corrected after both heads replaced. Now, 47 days later, error code is back. After replacing the carriage PCB as next step, is it possible to use the 2 (almost new) 47 day old heads ? How if special steps are needed ? Anything else to try before the carriage PCB ?

Have u managed to reuse the heads? I think I have same situation and same question as you.