355-001 after replace HD on IR5020i

[teckat]

Re: 355-001 after replace HD on IR5020i

If I take off LAN Card (don,t need), can solve this problem?

==========================
u can do as u please //You will NOT have the ability to enter the IP Address


u don't know what ver of firmware is on HDD

Minimum firmware versions to recognize the New Style Ethernet Board (FG6-9898-000):

Without these System Software & BootROM upgrades, a symptom of E740 will occur.

Model(

MN-CONT (system software):

BOOT-ROM:

imageRUNNER 5000

19.02 or higher

14.54 or higher

================================================== ==========================================
How to identify the old and new Ethernet Board PCB assemblies:
Either of the following part numbers is silk-screen printed on the PCB.
Old Part: FG3-1186*
New Part: FG3-3326*
* These part numbers are manufacturing numbers only and are NOT valid for ordering.

NIC.jpg


Old Ethernet Board PCB Assembly FG6-5964-000=Interchangeability =Yes

New Ethernet Board PCB Assembly FG6-9898-000 =Interchangeability=Yes


READ ATTACHED PDF-------

[satitjangdee]

Re: 355-001 after replace HD on IR5020i

Thank so much.

You great.