Canon ir c3380 - motor test

[kuby]

Trying to test the waste toner motor M12. The part-chk says M12 is a developing motor (does not check anyway). But how do you check the operation of this motor. Is the part-chk for the motors wrong? Thanks

[teckat]

Re: Canon ir c3380 - motor test

Trying to test the waste toner motor M12. The part-chk says M12 is a developing motor (does not check anyway). But how do you check the operation of this motor. Is the part-chk for the motors wrong? Thanks

==========================

Manual is a mess/

never could get a straight answer from Canon on Waste Motor M12 check in this model/series/
but M12 is correct == WASTE TONER MOTOR ASSEMBLY

[kuby]

Re: Canon ir c3380 - motor test

Thanks

[Canon345]

Re: Canon ir c3380 - motor test

I have found that the Waste Toner Motor (M12) can also generate noise which seems to be amplified through the machine. In Service Mode (COPIER > FUNCTION > PART-CHK), set MTR = 12, then switch on with MTR-ON and you will notice appreciable noise in that part of the machine (front left). A good motor makes very little noise. I tested with the motor right out of the assembly and you can feel the vibration.