[Misc] Add a Custom Button on Main Menu.

[JeyJey]

Hello.

I would like to know how to add a custom button to the main menu of photocopier, Canon IR4570, specifically a configuration for special features (2 on 1, etc).

Thanks.

[teckat]

Re: Add a Custom Button on Main Menu.

There are two configurable 'shortcut' buttons or standard keys for the Copy screen on the copier control panel.
Standard keys are also available for the Express Copy screen.
***************)
Perform the following steps to configure the Copy screen's standard keys:

1. Press the [Additional Functions] button.

2. Select [Copy Settings].

3. The two 'shortcut' buttons can be configured using the [Standard Key 1 Settings for Regular Screen] and [Standard Key 2 Settings for Regular Screen] options. Select either [Standard Key 1 Settings for Regular Screen] or [Standard Key 2 Settings for Regular Screen].

4. Scroll through the 'Group' section which lists the available options to create a shortcut button for. Select an option (ex. Job Build) and hit [OK].
A shortcut for this selected feature will now display on the regular Copy screen.
**Note that selecting [No Settings] from the 'Group' list will remove that shortcut button from the Copy screen.

5. Repeat step 4 for the second standard key, selecting a different option from the 'Group' list (ex. Cover/Sheet Insertion). A second shortcut for this other selected feature will now display on the regular Copy screen.

***************)

There are configurable 'shortcut' buttons or standard keys for the Express Copy screen on the copier control panel.
You can configure the Express Copy screen to display up to 5 set keys or up to 10 set keys.
Perform the following steps to configure the Express Copy screen's standard keys:

1. Press the [Additional Functions] button, then select [Copy Settings] > [Standard Key Settings for Express Copy Screen], or press the 'Register frequently used keys' shortcut button on the Express Copy screen.
2. The 'Standard Key Settings for Express Copy Screen' dialog box is displayed. Select the number of Standard Keys to be available ('Up to 5' or 'Up to 10').
3. Select a Standard Key and hit [Settings] to configure it.
4. Scroll through the 'Group' section which lists the available options to create a shortcut button for. Select an option (ex. Job Build) and hit [OK]. A shortcut for this selected feature will now display on the Express Copy screen.
**Note that selecting [No Settings] from the 'Group' list will remove that shortcut button from the Express Copy screen.

5. Repeat steps 3 and 4 for the second standard key, selecting a different option from the 'Group' list (ex. 400%). A second shortcut for this other selected feature will now display on the Express Copy screen. Repeat again for each shortcut button you wish to display on the Express Copy screen.