[Misc] Squeaking noise from back of iRAC9060 PRO

[V-P]

I am getting a squeak from the back side of the printer when it is running.

It should be somewhere in the back of the black drum/dev unit.

I have removed back cover and removed the flywheel but can't tell for sure where it is coming from.

it looks like a long ride to remove everything back there.

Any experienced pointers ?

[vigour]

Re: Squeaking noise from back of iRAC9060 PRO

It seems to happen on machines with low colour counts.
sometimes I have gotten rid of it by running about 100 double sided PG10 or so.
If that does not work, remove that small plastic cover beside the multifeeder
Look in you will see a small motor and drive belt and gears.
Lube between those gears and motor