[Error Code] E014-100 & Jam Code 0CF1

[tpant]

Imagepress C6000 getting regular jams, jam log 0CF1. Also been getting E014-100 on a regular basis.

Checked all connections several times.
Fuser seems to work freely. Checked and replace some bearings. Oiled Pressure Belt.
Replaced Fixing Motor, no change.

I am missing something.

[tpant]

Re: E014-100 & Jam Code 0CF1

Not sure about this yet, but seems like the problem is worse when duplexing.

[teckat]

Re: E014-100 & Jam Code 0CF1

Imagepress C6000 getting regular jams, jam log 0CF1. Also been getting E014-100 on a regular basis.

Checked all connections several times.
Fuser seems to work freely. Checked and replace some bearings. Oiled Pressure Belt.
Replaced Fixing Motor, no change.

I am missing something.

************
Fixing Belt Assembly needs to be rebuilt every 300k for LTR size or 195K for 11x17 or larger. The parts required for this service are in the 300K QA Kit: F02-5904-000.

_________________
One of the bearings is probably failing and spins freely when turned by hand but when a load is put upon it, will cause gear to wobble.


First Fixing Assembly Upper 1/2

Part number is FU6-0469-010 Gear, 16T/31T
Fuser 1: Figure 815, Item 42
Fuser 2: Figure 855, Item 47


[tpant]

Thanks. I hadn't really checked those gears yet. I will post findings.

[tpant]

Ended up being 2 things. The flag that controls external heater position was broken. Also gear that drove fixing belt had a crack in it causing drag. Thanks for the help. I hope this helps somebody in the future.

[tpant]

Re: E014-100 & Jam Code 0CF1

Still having problem. Same thing E014-0100 and also jam code 0CF1. Pulling my hair out.

[tpant]

It now seems that I have not been oiling the fixing belt assembly properly. I cleaned and oiled again. So far it is working. Any tips on oiling fixing belt the isn't in the manual.

[zoraldinho]

Re: E014-100 & Jam Code 0CF1

Little assist with this bulletin.

I remember about tips for oiling fixing belt from C1 model.It's similar unit.