If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
turn off copier pres 1 and 9 (hold it ) then turn on the copier.
That initalizes the hdd defragmentation. if does not help, you need to change the hdd and "fill" it with system software.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
turn off copier pres 1 and 9 (hold it ) then turn on the copier.
That initalizes the hdd defragmentation. if does not help, you need to change the hdd and "fill" it with system software.
Comment