IRA C5030 parts needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cscce
    Trusted Tech

    Site Contributor
    100+ Posts
    • Jun 2014
    • 156
    #1

    [Misc] IRA C5030 parts needed

    We have a customer with a Canon IRA c5030 with A-1 finisher. The A-1 finisher is malfunctioning after 185,000 pages and it's the second machine out if 6 to develop finisher problems.
    The customer wants to replace the A-1 finisher with the standard exit tray so we are looking for parts. If anyone has replaced the standard tray with an A-1 finisher and wants to sell the original parts please let me know.
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: IRA C5030 parts needed

      Originally posted by cscce
      We have a customer with a Canon IRA c5030 with A-1 finisher. The A-1 finisher is malfunctioning after 185,000 pages and it's the second machine out if 6 to develop finisher problems.
      The customer wants to replace the A-1 finisher with the standard exit tray so we are looking for parts. If anyone has replaced the standard tray with an A-1 finisher and wants to sell the original parts please let me know.

      *****
      U mean remove the Internal A1 Finisher ?
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • cscce
          Trusted Tech

          Site Contributor
          100+ Posts
          • Jun 2014
          • 156
          #3
          Re: IRA C5030 parts needed

          Yes, they want to remove the A-1 finisher.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: IRA C5030 parts needed

              Originally posted by cscce
              Yes, they want to remove the A-1 finisher.
              ------------------------
              Inner_Finisher-A1.pdf

              unless someone bagged or stored these parts below/ it's a pain to find them


              Delivery tray 1 pc.
              2nd delivery tray 1 pc.(*1)
              Stopper 1 pc.(*1)
              Reversal guide 1 pc.
              Right front cover 1 pc.
              Inner cover (small) 1 pc.
              Control panel lower cover 1 pc.
              Sensor flag 1 pc.(*2)
              Cap 2 pcs.
              Protection cover 1 pc.
              *1- only when the 2nd delivery tray is installed in the host machine
              *2- 2 pcs. only when the 2nd delivery tray is installed in the host machine
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • fr2au
                  Technician
                  • Jan 2008
                  • 20
                  #5
                  Re: IRA C5030 parts needed

                  Hi there,
                  I have the following parts that you are after

                  Inner lower cover assembly FM3-8940-000
                  Right front cover assembly FM3-6104-000
                  Lever, full detect FC8-4802-000
                  The upper mentioned parts need to be removed and disregarded when the internal finisher A1 need to be installed on the Canon iRADVC 5000 series

                    Comment

                    Previous template Next
                    Working...