J0114 on iRADVC only when duplexing

[Ingranaggio_rotto]

Good Saturday to everybody !
I have a jam J0114 on a iRADVC 7055 only when duplexing.

The problem is frequent and although I replaced both the left side door that its group's internal paper path I have not solved!
Suggestions?



Thank you !

[vigour]

Re: J0114 on iRADVC only when duplexing

Pay attention to the inner delivery assembly, (yellow door at the fuser exit}
The metal roller is held down by springs and a plastic base on both ends.
The rear plastic piece especially moves out of place.
Also, clean bushings on both rollers,
and black one way gear on the orange roller