irac2020i E225-0001

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rajmer
    Technician
    • Dec 2008
    • 22
    #1

    irac2020i E225-0001

    Hi!
    I have a problem with my irac2020i e225-0001
    Problem is only when i copy from dadf,print and copy from the glas is O.K,from dadf i got copy with gray background and code E225.
    I have change the the flat cable of ccd and all carriage assembly,but no luck.
    Please help
    THNX
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: irac2020i E225-0001

      Originally posted by rajmer
      Hi!
      I have a problem with my irac2020i e225-0001
      Problem is only when i copy from dadf,print and copy from the glas is O.K,from dadf i got copy with gray background and code E225.
      I have change the the flat cable of ccd and all carriage assembly,but no luck.
      Please help
      THNX


      **😰
      The light intensity of the Scanner Unit is faulty.
      The light intensity of the Scanner Unit during shading is under the specified level.
      __Not much left\ after flex cable & scanner unit replacement.

      _Relay PCB(PCB1)
      _Main Controller2 PCB(UN12)
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • rajmer
          Technician
          • Dec 2008
          • 22
          #3
          Re: irac2020i E225-0001

          Unfortunately it was Main controler.
          Problem fix
          THNX

            Comment

            Previous template Next
            Working...