imagepress C1+ Auto Gradation + Yellowish blank page

[dragsprit]

hi
when i am making full gradation.
i have some print error like the attached photos.
if the 1st print is good the 2nd will have problem.
or 3rd.
All dens are around 0.00 .
The staters are new.
and sometimes when printing PG05 blank pages,
pages are yellowish.
i screw the ITB. also do everything acording to service manual .

For my self, the photo prints ,they are ok.


1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg

regards

[teckat]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

hi
when i am making full gradation.
i have some print error like the attached photos.
if the 1st print is good the 2nd will have problem.
or 3rd.
All dens are around 0.00 .
The staters are new.
and sometimes when printing PG05 blank pages,
pages are yellowish.
i screw the ITB. also do everything acording to service manual .

For my self, the photo prints ,they are ok.


[ATTACH=CONFIG]28143[/ATTACH][ATTACH=CONFIG]28144[/ATTACH][ATTACH=CONFIG]28145[/ATTACH][ATTACH=CONFIG]28146[/ATTACH][ATTACH=CONFIG]28147[/ATTACH][ATTACH=CONFIG]28148[/ATTACH]

regards

================================================== =============================


first remove Fiery Calibration

[teckat]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

hi
when i am making full gradation.
i have some print error like the attached photos.
if the 1st print is good the 2nd will have problem.
or 3rd.
All dens are around 0.00 .
The staters are new.
and sometimes when printing PG05 blank pages,
pages are yellowish.
i screw the ITB. also do everything acording to service manual .

For my self, the photo prints ,they are ok.


[ATTACH=CONFIG]28143[/ATTACH][ATTACH=CONFIG]28144[/ATTACH][ATTACH=CONFIG]28145[/ATTACH][ATTACH=CONFIG]28146[/ATTACH][ATTACH=CONFIG]28147[/ATTACH][ATTACH=CONFIG]28148[/ATTACH]

regards

================================================== =============================

Calibration_Process_iPC1.pdf (1.43 MB)


first > I would go into control panel under PRINTER tab> scroll to remove your Q2 Fiery RIP Calibration

>then now execute the Printers Auto Gradation Correction (Full Correction) before and after performing Shading Correction .

now do your Q2 Fiery RIP Calibration > either with the KODAK GRAY SCALE or Densitometer/ Spectrometer ( if applies/ have / use one )

- To improve the accuracy of shading correction
- To ensure performance after shading correction

RED ARROW on pic shows poor/saturated background when Calibrations are not performed properly

[dragsprit]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

thanks for reply.
i want to ask ;
1. without efi ES-1000 , can i make shading.
2. i have colormunki and just do icm profiles.
3. for the auto gradation pages , some pages which i circle them,
why they appear like that.


regards

[teckat]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

thanks for reply.
i want to ask ;
1. without efi ES-1000 , can i make shading.
2. i have colormunki and just do icm profiles.
3. for the auto gradation pages , some pages which i circle them,
why they appear like that.


regards

*******************
Colormunki,
know what it is, but never used program ( from X riteCorp )
spectrophotometer

You Use to calibrate the Q2 server_?

go into the printer tab icon on the machine scroll down to calibrate and remove calibration.

U mean those white lines on test prints _?

Profiles
Using ICC Profiles with Canon Printers - Steve's Digicams

[dragsprit]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

i have Q2 server.

yes i am asking the white lines.

[teckat]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

i have Q2 server.

yes i am asking the white lines.

Check the ITB

[teckat]

Re: imagepress C1+ Auto Gradation + Yellowish blank page

i have Q2 server.

yes i am asking the white lines.

Check the ITB