If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi! Customer bring me this old mashine with E0 service code. I check fuser lamp, thermofuse, termistor, fuses... and nothing. When try to turn copier on, they show this code and then turn off. Can anybody help? Its urgent!!!
Thanks
e000 is low temp, e001 and e002 is high temp,e003 is erratic fuser temp,and e007 is the fixing filmm check the film it could be torn or not turning correctly, there is no heat lamp so you couldnt have checked it, it uses a heat bar, hope this helps
Comment