If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
iRC4080 Multicolor line in copies or print in the midle of page.
[Misc]
iRC4080 Multicolor line in copies or print in the midle of page.
Hello everybody! working on iRC4080 i have not find the problem while we print o doing copies, prints came out with multicolor lines in the midle of page, even when i try to do a full calibration. can anyone help please? Prueba.JPG
Re: iRC4080 Multicolor line in copies or print in the midle of page.
Originally posted by Smartmind
Hello everybody! working on iRC4080 i have not find the problem while we print o doing copies, prints came out with multicolor lines in the midle of page, even when i try to do a full calibration. can anyone help please?
[ATTACH=CONFIG]28410[/ATTACH]
Hi,
Replace your ITB cleaner Assy, This issue is very common with these machines. Also i recommend that you replace the Cleaner Assy every time you replace the Intermediate Transfer Belt.
Comment