c3220 charge roller problem?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ps22sp
    Technician

    Site Contributor
    50+ Posts
    • Aug 2014
    • 83

    #1

    c3220 charge roller problem?

    c3220 output every 5 sheets has one vertical stripe
    Attached Files
  • vigour
    Service Manager

    1,000+ Posts
    • Aug 2010
    • 1038

    #2
    Re: c3220 charge roller problem?

    Looks like cyan is missing.
    Run test prints PG 10 and single colour PG 5, you should see it on cyan only.
    The charge roller is Not sold seperately by Canon. It is part of the drum assembly ( cartrigdge ),

    Comment

    • RAI
      Technician

      Site Contributor
      • Feb 2014
      • 44

      #3
      Re: c3220 charge roller problem?

      Ok so the attached picture is portrait. So your running this paper letter-r and your getting the vertical weakness being displayed. Like mentioned, I'd run a test sheet 5 of each colour individually at 128 setting and see if you locate problem drum unit and replace it.

      Looking at the picture as if it were printed in portrait I would say you run test sheet 10 find the problem unit unit and replace it.

      These are all in one units as mentioned. Once dirty or debris get in here replacement is only option.

      Comment

      Working...