error code : iradvc5035

[canonjay]

greeting guys,

im encountered frequently error code e0020-0100,e0020-0200,e0020-0300,e0020-0400. after changed.main.drive.unit..
any solution for.this.madness??

[teckat]

Re: error code : iradvc5035

greeting guys,

im encountered frequently error code e0020-0100,e0020-0200,e0020-0300,e0020-0400. after changed.main.drive.unit..
any solution for.this.madness??

~~~~~~~~;-\
Something binding drum developing drive assembly.

Also___Check the connectors and wiring to the Drum Driver PCB

See pic link
https://lh6.ggpht.com/W1Tx9odL-OnKiQ...QhBAWuFxw=s136

[canonjay]

Re: error code : iradvc5035

~~~~~~~~;-\
Something binding drum developing drive assembly.

Also___Check the connectors and wiring to the Drum Driver PCB

See pic link
https://lh6.ggpht.com/W1Tx9odL-OnKiQ...QhBAWuFxw=s136

possible the board will harm? if wrongly cable connect? and cause this board malfunction?

[roho]

Re: error code : iradvc5035

can you boot up without these codes, or are they immediate? Do the motors rotate at all? I suspect a pinched wire, or blown drum driver pcb is most likely with those range of codes. You will likely need to remove the drum drive again and check to see if the wires are all fine.

[Canon345]

Re: error code : iradvc5035

Suspect the damaged and binding drum drive assembly to have also damaged this PCB or visa/versa. The PCB has cured this type of error.
Known fix : The Drum Driver PCB was replaced to resolve the issue. The binding issue may have caused the failure of the Drum Driver PCB.

[canonjay]

Re: error code : iradvc5035

hi sorry for late..response.. after changed drum driver pcb..the error solved n checked the wiring also. thanx guys