Canon iR1022i Firmware needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • teckat
    replied
    Re: Canon iR1022i Firmware needed

    [QUOTE=teckat;463778]4fi\ii\
    ~~~~~~~;-)
    Place a service call with a Canon Dealership that have trained personal.
    😇

    Leave a comment:


  • teckat
    replied
    Re: Canon iR1022i Firmware needed

    Originally posted by Roi
    Hello,

    I'm having problems with the web interface of my Canon iR1022i. It is crashing all the time - I have to turn off and on the printer every 2 minutes or every one or two changes like addresses I like to save there. This is very very annoying. On the internet I found information about this bug and people were able to solve by upgrading the firmware.

    BTW: Is a newer firmware also supporting SMTP-Auth? The firmware I run here is only supporting SMTP after POP, which is ancient technology.

    I found an older thread where someone is asking for the same. Not sure if I need the firmware plus SST or UST. Or a single package. Doesn't matter to me, I just want to upgrade. ;-)

    Maybe it does matter, the printer version should be European or German (bought in Germany).

    Can someone help me? Would be really really great.

    Cheers,
    Roi


    4fi\ii\
    ~~~~~~~;-)
    Place a service call with a Canon Dealership that have trained if

    Leave a comment:


  • Roi
    started a topic Canon iR1022i Firmware needed

    Canon iR1022i Firmware needed

    Hello,

    I'm having problems with the web interface of my Canon iR1022i. It is crashing all the time - I have to turn off and on the printer every 2 minutes or every one or two changes like addresses I like to save there. This is very very annoying. On the internet I found information about this bug and people were able to solve by upgrading the firmware.

    BTW: Is a newer firmware also supporting SMTP-Auth? The firmware I run here is only supporting SMTP after POP, which is ancient technology.

    I found an older thread where someone is asking for the same. Not sure if I need the firmware plus SST or UST. Or a single package. Doesn't matter to me, I just want to upgrade. ;-)

    Maybe it does matter, the printer version should be European or German (bought in Germany).

    Can someone help me? Would be really really great.

    Cheers,
    Roi
Working...