Canon MP190 waste ink absorber E8

[ldfrepairs]

I performed reset and printer shows reset and prints but when I shut off and turn back on E8 shows again. below is the steps I used to reset error. Is this the correct procedure.
Reset Procedure:

• Reset buttonprinterReset buttonColor StartColor StartReset Buttonprinter starts to configure itself. This should take approximately around 20 seconds.
• The no. ToolAToolReset button button, and then release the

[teckat]

Re: Canon MP190 waste ink absorber E8

I performed reset and printer shows reset and prints but when I shut off and turn back on E8 shows again. below is the steps I used to reset error. Is this the correct procedure.
Reset Procedure:

• Turn ON the printer.
• Press and Hold the “Reset button” on the printer.
• While pressing the “Reset button“, press and hold the “Color Start” button.
• Wait for 5 seconds.
• Release the “Color Start” button, and then release the “Reset Button“.
• Wait until the printer starts to configure itself. This should take approximately around 20 seconds.
• The no. “1” should be on the display, press and hold the “Tool” button and the letter “A” should now be on the display.
• While pressing on the “Tool” button, press and hold the “Reset button“.
• Wait util there are no more blinking lights on the printer.
• Release the “Tool” button, and then release the “Reset Button“.

https://youtu.be/LNIHCUvoeh4

[ldfrepairs]