Error code e000006-0001 on canon ir advance c7065

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • browny
    Technician

    50+ Posts
    • Nov 2010
    • 81

    #1

    [Error Code] Error code e000006-0001 on canon ir advance c7065

    HELLO ALL
    Do you know what cause the canon machine IR ADVANCE C7065 have error code E000006-0001.i checked under fuser drawer SW7 is OK. FUSER drawer & fuser (replaced : still the same error code) ,the plug connector of DC CONTROL PWB plug J1241 is OK ( but I don't know DC CONTROL PWB IS GOOD OR NOT ) ... Please help .Thank you
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Error code e000006-0001 on canon ir advance c7065

    Originally posted by browny
    HELLO ALL
    Do you know what cause the canon machine IR ADVANCE C7065 have error code E000006-0001.i checked under fuser drawer SW7 is OK. FUSER drawer & fuser (replaced : still the same error code) ,the plug connector of DC CONTROL PWB plug J1241 is OK ( but I don't know DC CONTROL PWB IS GOOD OR NOT ) ... Please help .Thank you



    Try Removing the housing and tightening the switch SW7 -

    Part: FM4-1282-000
    Description:
    CABLE, FIXING DRAWER (fixing assembly harness)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • browny
      Technician

      50+ Posts
      • Nov 2010
      • 81

      #3
      Re: Error code e000006-0001 on canon ir advance c7065

      Thank you , I'll order it and try ...

      Comment

      • browny
        Technician

        50+ Posts
        • Nov 2010
        • 81

        #4
        Re: Error code e000006-0001 on canon ir advance c7065

        More info.:I did take it out , and reinstalled it this morning but did not work... so I will order the SW 7 to try .Thank again . ( when I came to the machine : 1rst : i saw a piece of paper inside the fuser drawer ( right side : face to machine ) I removed it and reset in Diagnostic many times but can not clear the code , I changed the whole Fixing drawer ( from another working machine ) but still the same ,checked the DC control PWB & wiring ,plug ... Do you think the DC Control PWB (FM3-9755) ?

        Comment

        • browny
          Technician

          50+ Posts
          • Nov 2010
          • 81

          #5
          Re: Error code e000006-0001 on canon ir advance c7065

          Thank You TECKAT ,machine is FIXED, the problem is DC CONTROLLER I/F PCB ( FM3-9571-000) ....after replaced, machine is now back to normal , no more error code.

          Comment

          Working...