Canon ircadv 5030 ,hole punch ,finisher c1

harrison741

Junior Member

Join Date: Jun 2010

Posts: 4
#1

[Jamming] Canon ircadv 5030 ,hole punch ,finisher c1

06-24-2015, 10:11 PM

Hi,I have a jam code of FF90.randomly occurring,I have upgraded firmware ,replaced buffer sensors,extra turns on the sensor arm springs.i have never seen it jam,but it is in the history.the machine has done 2 million.most posts refer to inner finisher issues.the manual refers to sequence error!
Tags: None
teckat

Field Supervisor

Site Contributor
10,000+ Posts

Join Date: Jan 2010

Posts: 16083
#2

06-24-2015, 10:40 PM

Re: Canon ircadv 5030 ,hole punch ,finisher c1

Originally posted by harrison741

Hi,I have a jam code of FF90.randomly occurring,I have upgraded firmware ,replaced buffer sensors,extra turns on the sensor arm springs.i have never seen it jam,but it is in the history.the machine has done 2 million.most posts refer to inner finisher issues.the manual refers to sequence error!

Have u tried a DController replacement

**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment

[Jamming] Canon ircadv 5030 ,hole punch ,finisher c1