If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
When start my canon ir 3300 error code e000007-0000 come and copier machine not working. Please do needful as soon as possible.
Please do the following as soon as possible; clear the error in service mode, change the fuser film, change the fixing unit motor or DC controller. If all else fails, call a trained canon tech.
Tou will most likely find that the fixing film is torn at the end that measures home position (white tab on film) if not torn will be soiled. Check parts, reset error and hope for the best
Comment