imagePRESS 1135 JAM 0116

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Zela
    Technician

    Site Contributor
    • Mar 2014
    • 25
    #1

    [Jamming] imagePRESS 1135 JAM 0116

    Greetings to all
    Lately, I have a problem with the paper misfeed fixation.
    I changed the delivery door fixing with separators for the upper and lower.
    The delivery assy I changed the rollers on the administration.
    It seems that the paper hangs on one of the upper separator, the one on which I took to jamming.
    Engine ran without any problems around 2000 sheet and then it again started jamming.
    JAM is still the same 0116th
    Printed on self-copying (carbon) in 60 g size 305x430mm
    The machine has traveled 11M.
    please help.
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: imagePRESS 1135 JAM 0116

      Originally posted by Zela
      Greetings to all
      Lately, I have a problem with the paper misfeed fixation.
      I changed the delivery door fixing with separators for the upper and lower.
      The delivery assy I changed the rollers on the administration.
      It seems that the paper hangs on one of the upper separator, the one on which I took to jamming.
      Engine ran without any problems around 2000 sheet and then it again started jamming.
      JAM is still the same 0116th
      Printed on self-copying (carbon) in 60 g size 305x430mm
      The machine has traveled 11M.
      please help.

      ��
      Is this issue only on that listed stock (Carbon).
      _?
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Zela
          Technician

          Site Contributor
          • Mar 2014
          • 25
          #3
          Re: imagePRESS 1135 JAM 0116

          Now I do not know exactly but tech 11M is printed on 80% carbon and until now it was going pretty good. about 1 month until it began to manifest itself slightly. and now it's about every 50 sheets.After servicing this in turn drives the 2,000 sheets and after the service technician that will turn angry

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: imagePRESS 1135 JAM 0116

              Originally posted by Zela
              Now I do not know exactly but tech 11M is printed on 80% carbon and until now it was going pretty good. about 1 month until it began to manifest itself slightly. and now it's about every 50 sheets.After servicing this in turn drives the 2,000 sheets and after the service technician that will turn angry


              is this Carbon feed from one tray
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • Zela
                  Technician

                  Site Contributor
                  • Mar 2014
                  • 25
                  #5
                  Re: imagePRESS 1135 JAM 0116

                  The combined administration of 3 containers of pod-deck C1, or the last tray pod-deck

                    Comment

                    Previous template Next
                    Working...