[Misc] "Supply" in Service Mode iR5030 Adv

[mynameis]

Hi.

Is there a function to supply toner to the hoppers in service mode?
I know from C1 models it is Copier>Function>Install>Spply-4

This option is missing on the iR.

I changed the hoppers and now i am affraid if the printer is re-filling hoppers automatically?

[Jake2o]

Re: "Supply" in Service Mode iR5030 Adv

Hi.

Is there a function to supply toner to the hoppers in service mode?
I know from C1 models it is Copier>Function>Install>Spply-4

This option is missing on the iR.

I changed the hoppers and now i am affraid if the printer is re-filling hoppers automatically?

No it should do it automatically the only install procedure is after replacing Developer housing before installing a toner cartridge

■■Actions after Replacement
When replacing the Developing Assembly, make sure to initialize before installing the Toner
Container.
COPIER > FUNCTION > INSTALL > INISET-M
If install the Toner Container before initialization, T/D ratio cannot set the right value.

But there is nothing for filling the toner hopper.