ir3530

[repeatcopiers]

I have an ir3530 in the field that is just a copier, no Print or Finisher. You know how even without a finisher you can sort where one set is sent out Letter and the next is sent out Letter R, etc. This copier lags for about 20 seconds in between the Letter set and the Letter R set. Is that normal? I don't have another one of these machines out there w/o a finisher. The Letter set following the Letter R comes out quickly, it just seems to lag on each Letter R set.

Also, the history shows several E733-0001 recently.......there is no print function on this, what could be causing this?

[teckat]

Re: ir3530

I have an ir3530 in the field that is just a copier, no Print or Finisher. You know how even without a finisher you can sort where one set is sent out Letter and the next is sent out Letter R, etc. This copier lags for about 20 seconds in between the Letter set and the Letter R set. Is that normal? I don't have another one of these machines out there w/o a finisher. The Letter set following the Letter R comes out quickly, it just seems to lag on each Letter R set.

Also, the history shows several E733-0001 recently.......there is no print function on this, what could be causing this?

Printer Communication Error
U don't need to be connected to see this code pop

follow through with a 1 & 9 Hard drive check (Defrag) on the Hard drive
Power off >hold down 1 & 9 key while powering back > hold until u see white blocks dropping on screen



Flash Dimm on the DC controller could be faulty -

the Reader Controller pcb can cause this code -
Power Supply could also be going on the blink -

[hinbox]

Re: ir3530

Flashing machine with latest version of software if available

[pinheiro]

Re: ir3530

Hi
You could not flash the DC Controller software.
Replace the flash dimm on the DC Controller, it's faulty

Reg