If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Customer gets replace the ink tank error but because of the error cant get the cover open because none of the buttons will respond..due to the error. How do you get around this ie. service mode?
Thanks
D
You never realize how cheap a professional is until after you let an amateur do it.... and
if this was an easy thing to do then everybody would be doing it! But it isn't and they are not!!
Comment