When I turn on this machine I get the start key and power LED on the control panel to light up but nothing on the display screen and no fans, motors, or lamps come on. I've checked and changed out the power supply but still can't get any power output out of it. The only power that I see coming out of the power supply is 120VAC and 5VDC but nothing else. The interlock switches seem ok. Any Ideas would be helful. Thanks.
-
-
Try reseating the connectors on the A board and make sure all of the ground screws are in and tight -
I don't mean to be flip, but is the operation switch on also? The one on the right hand side of the control panel.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
-
I had an account that constantly turned it off and the machine "wouldn't do anything." I finally fashioned a cover out of thick stock, two paper clips and some tape. I just like to try the obvious things first. Patch cables are my other stand by answer.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
Comment