Bizhub Pro 951 and SSL

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009

    #1

    [Misc] Bizhub Pro 951 and SSL

    I am trying to get equitrac office follow print connected to a Pro951, there are, so far, 20 other office devices that are connecting properly. EQ will push the client to the 951 without any issues, but when I try to authenticate, I get an authentication error. I am pretty sure the device settings are correct, but I do see the "server has a weak ephemeral Diffie-Hellman public key" message when I try to connect (from the customer's server) to Pagescope with chrome, IE is very buggy also with slow responses and many time outs when changes are made. When I connect to the device with my laptop, Chrome, Mozilla, and IE work as expected. Anyone know what can be done to the 951 to get past this weak server key error? TIA Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
  • allan
    RTFM!!

    5,000+ Posts
    • Apr 2010
    • 5462

    #2
    Re: Bizhub Pro 951 and SSL

    Post this in connectivity. Could that be a certificate or CA problem?
    Whatever

    Comment

    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064

      #3
      Re: Bizhub Pro 951 and SSL

      go into the certificates and delete the one there and tell it to recreate another. Then power cycle. I had that on a refurb that never got wiped and the certificate was expired.
      And Star Trek was just a tv show...yeah right!

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #4
        Re: Bizhub Pro 951 and SSL

        This is part of the setup process...delete certs, new DNS hostname, SMB client settings name and workgroup, create new cert, and associated SSL protocols, enable SSL for user/admin mode and enable SSL for Open API/TCP Socket....Restart MFP. Again EQ pushes to MFP, just getting authentication error when MFP tries to login. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        Working...