Hello.
Tell me what could be the problem:
I have a device xrite I1pro2.
However, when i try to calibrate the machine writes an error - find 0 patces try again
probably. this is due to the fact. that there is only the choice of method EFI ES-1000
If I understand the right method (EFI ES-2000) must appear in the program at least 10 versions (I have 8 release 2 pic 1.jpg)
Maybe someone can give a disk image with the latest version or tell me how else can we make friends with the two devices.
Sorry for my bad English - I use a translator.
Tell me what could be the problem:
I have a device xrite I1pro2.
However, when i try to calibrate the machine writes an error - find 0 patces try again
probably. this is due to the fact. that there is only the choice of method EFI ES-1000
If I understand the right method (EFI ES-2000) must appear in the program at least 10 versions (I have 8 release 2 pic 1.jpg)
Maybe someone can give a disk image with the latest version or tell me how else can we make friends with the two devices.
Sorry for my bad English - I use a translator.