Konica Minolta C7000 Big Black Problem!!!!

[tinto89]

Hi guys!
I have a problem that haunts me!!
I had about 2 c7000 who I replaced the dev.unit K and the problem disappeared.
Now there is a third c7000 (c7000 always) that had the problem in question...great...I replace the dev. unit K and actually the problem is resolved.
After 5k click back problem!!! shit...I think of a dev. K faulty unit and replace it with another new...and the problem disappears.
Now it's been a bit of time and always about 5k click and returned yet!!!! I attach some pictures.
ps.it is a problem to transfers?It states that the first time that happened to me I tried, before replacing the dev.unit k, to change the kit transfer belt, drum, charging without solving the problem.
It states that even if you replace the developer K the fault disappears only to return always after about 5k click!!!!
I hope you can help me! thanks and sorry for my bad english...i'm italian.

[Tech Helpdesk]

Re: Konica Minolta C7000 Big Black Problem!!!!

Hi guys!
I have a problem that haunts me!!
I had about 2 c7000 who I replaced the dev.unit K and the problem disappeared.
Now there is a third c7000 (c7000 always) that had the problem in question...great...I replace the dev. unit K and actually the problem is resolved.
After 5k click back problem!!! shit...I think of a dev. K faulty unit and replace it with another new...and the problem disappears.
Now it's been a bit of time and always about 5k click and returned yet!!!! I attach some pictures.
ps.it is a problem to transfers?It states that the first time that happened to me I tried, before replacing the dev.unit k, to change the kit transfer belt, drum, charging without solving the problem.
It states that even if you replace the developer K the fault disappears only to return always after about 5k click!!!!
I hope you can help me! thanks and sorry for my bad english...i'm italian.

Hi there

Try spacing both edgesDrum Tape.pngImage Fault.png of the drum with tape. This normally fixes the problem.

[silviux]

Drum Tape.pngImage Fault.png of the drum with tape. This normally fixes the problem.[/QUOTE]

[tinto89]

Re: Konica Minolta C7000 Big Black Problem!!!!

[ATTACH=CONFIG]31708[/ATTACH][ATTACH=CONFIG]31709[/ATTACH] of the drum with tape. This normally fixes the problem.

[/QUOTE]

thanks guys I try and I'll know
I see quite convinced and I hope works

silviux hai pm

[roberto.bertolani]

[lucky13]

Re: Konica Minolta C7000 Big Black Problem!!!!

Hi guys!
I have a problem that haunts me!!
I had about 2 c7000 who I replaced the dev.unit K and the problem disappeared.
Now there is a third c7000 (c7000 always) that had the problem in question...great...I replace the dev. unit K and actually the problem is resolved.
After 5k click back problem!!! shit...I think of a dev. K faulty unit and replace it with another new...and the problem disappears.
Now it's been a bit of time and always about 5k click and returned yet!!!! I attach some pictures.
ps.it is a problem to transfers?It states that the first time that happened to me I tried, before replacing the dev.unit k, to change the kit transfer belt, drum, charging without solving the problem.
It states that even if you replace the developer K the fault disappears only to return always after about 5k click!!!!
I hope you can help me! thanks and sorry for my bad english...i'm italian.

drums made in Malaysia all had wrong adjustments and were too close to dev unit the china ones were correct if you have a Malaysian drum with a green dot sticker on box then they are the fixed ones hope this helps

[LinxTech]

Re: Konica Minolta C7000 Big Black Problem!!!!

Did this solve your problem?

[tinto89]

Re: Konica Minolta C7000 Big Black Problem!!!!

Did this solve your problem?

yes yes solved...
very thanks