ineo 185 makes black copies

[Guest]

i have a new machine ineo 185 , when i make copy it makes black copies on side of the paper i think it was the drum so i cleaned it still no effect
photo499656764593121203.jpg

i appreciate any suggestions about this

[EarthKmTech]

Re: ineo 185 makes black copies

This engine has no paper dust remover due to cost cutting if its the same as a bizhub 195. I've had issues on the KM 195 with lint and paper dust building up at the top of the drum getting contaminated with toner and developer and then arcing out the transfer roller in as little as 5-10k pages. This causes intermittent blanking starting at one side of the page in a similar pattern.

I wouldnt be surprised if something similar is going on in the charge section.

[Guest]

Re: ineo 185 makes black copies

This engine has no paper dust remover due to cost cutting if its the same as a bizhub 195. I've had issues on the KM 195 with lint and paper dust building up at the top of the drum getting contaminated with toner and developer and then arcing out the transfer roller in as little as 5-10k pages. This causes intermittent blanking starting at one side of the page in a similar pattern.

I wouldnt be surprised if something similar is going on in the charge section.

thank you for replying , so i have to change the imaging unit right ?

[EarthKmTech]

Re: ineo 185 makes black copies

thank you for replying , so i have to change the imaging unit right ?

That will most likely fix it, try and see why it failed and let me know. Also make sure the transfer roller isnt wrapped with paper dust etc.