Bizhub 601 jams during duplexed jobs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • richmods
    Technician
    • Aug 2013
    • 91

    #16
    Re: Bizhub 601 jams during duplexed jobs

    Originally posted by allan
    What was the jam code?
    I was getting both J3101 and 3102 codes.

    Comment

    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5462

      #17
      Re: Bizhub 601 jams during duplexed jobs

      one last request do you have the part numbers for the parts replaced?
      Whatever

      Comment

      • richmods
        Technician
        • Aug 2013
        • 91

        #18
        Re: Bizhub 601 jams during duplexed jobs

        Originally posted by allan
        one last request do you have the part numbers for the parts replaced?
        Sorry, must have overlooked the request for part #s. Here is what I replaced:

        57AA77210 Paper Exit Idle Gear1 25T
        57AA77220 Paper Exit Idle Gear2 25T
        56AA77220 Paper Exit Driving Gear1 24T
        56AA77231 Paper Exit Driving Gear2 18T

        Hope that helps.
        btw, these are very easy to replace...took me less than 15 min.

        Comment

        • antone
          Trusted Tech

          250+ Posts
          • Oct 2014
          • 344

          #19
          Re: Bizhub 601 jams during duplexed jobs

          Try Mylar..lower if jam is on it's the way out

          Sent from my VS980 4G using Tapatalk

          Comment

          • antone
            Trusted Tech

            250+ Posts
            • Oct 2014
            • 344

            #20
            Re: Bizhub 601 jams during duplexed jobs

            Originally posted by richmods
            Sorry, must have overlooked the request for part #s. Here is what I replaced:

            57AA77210 Paper Exit Idle Gear1 25T
            57AA77220 Paper Exit Idle Gear2 25T
            56AA77220 Paper Exit Driving Gear1 24T
            56AA77231 Paper Exit Driving Gear2 18T

            Hope that helps.
            btw, these are very easy to replace...took me less than 15 min.
            Clutch...need

            Sent from my SM-N920V using Tapatalk

            Comment

            Working...