Got this problem message on a remote machine.
Exceeds the max number of pages that can be stapled.
The machine seems to be limited to no pages.
One page on these machine would do the job and not staple a single page.
It gives that message from the ADF stopping paper feed on the first page.
Same thing from the platen glass.
Firmware does not seem to be the problem and i don't really want to change the NVRAM.
Konica minolta FS-527 on an Olivetti branded machine.
That could be the problem.
May be a magic dip switch fix?
The finisher does work on another KM machine.
Anybody came across this problem.
Exceeds the max number of pages that can be stapled.
The machine seems to be limited to no pages.
One page on these machine would do the job and not staple a single page.
It gives that message from the ADF stopping paper feed on the first page.
Same thing from the platen glass.
Firmware does not seem to be the problem and i don't really want to change the NVRAM.
Konica minolta FS-527 on an Olivetti branded machine.
That could be the problem.
May be a magic dip switch fix?
The finisher does work on another KM machine.
Anybody came across this problem.