c550 multi-feed out of LCT

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • splblazer91
    Trusted Tech

    100+ Posts
    • Jul 2014
    • 204
    #1

    c550 multi-feed out of LCT

    Machine will sometimes feed anywhere from 4 to 12 sheets at a time. We have replaced the Paper Feed Assy as well as tried different pressure settings on Sep Roller. Problem goes away then comes back a few days later. Any ideas?
    Tags: None
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5459
      #2
      Re: c550 multi-feed out of LCT

      The plate could lift skew??
      Whatever

        Comment

        • EarthKmTech
          Step aside, noob

          1,000+ Posts
          • May 2009
          • 2139
          #3
          Re: c550 multi-feed out of LCT

          Is this for tray 3 ?

          they made a stick on metal plate to assist in separation in tray 3, or you might be able to just take the whole tray out of a c452 series and make it fit (I never tried this and cant verify if it will work)

            Comment

            • Iowatech
              Not a service manager

              2,500+ Posts
              • Dec 2009
              • 3930
              #4
              Re: c550 multi-feed out of LCT

              Um, could the paper have glue from the ream wrapper holding it together?
              Sorry for such a stupid post, but that is something I have seen before. And it causes something similar to this.

                Comment

                • splblazer91
                  Trusted Tech

                  100+ Posts
                  • Jul 2014
                  • 204
                  #5
                  Re: c550 multi-feed out of LCT

                  yes tray 3.....not glue on the paper. This has been coming and going for months now.

                    Comment

                    • EarthKmTech
                      Step aside, noob

                      1,000+ Posts
                      • May 2009
                      • 2139
                      #6
                      Re: c550 multi-feed out of LCT

                      Originally posted by splblazer91
                      yes tray 3.....not glue on the paper. This has been coming and going for months now.
                      try the mod plate, though i suspect it wont be available much longer.

                        Comment

                        Previous template Next
                        Working...