c6500 has non responsive display

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jother
    • Jun 2025

    #1

    [Electrical] c6500 has non responsive display

    Display has normal startup image but is non responsive to touch.
  • JrTech
    Trusted Tech

    100+ Posts
    • Jun 2013
    • 217

    #2
    Re: c6500 has non responsive display

    You need the touch screen (Glass) for the display. They run about $400 if you can get them from KM or a tech on here may have one. Post in Wanted for this part number below.

    Konica Minolta 56UA87550

    Hope this helps

    Comment

    • Zoran
      Technician
      • May 2013
      • 46

      #3
      Re: c6500 has non responsive display

      Go to aliexpress



      37,74

      Comment

      • service_man
        Technician
        50+ Posts
        • Jul 2012
        • 59

        #4
        Re: c6500 has non responsive display

        Try to clean with Alcohol and maybe is working.
        If not working, put the mouse on the USB port, and control everything with the mouse...

        Its better than pay 400$

        Regards

        Comment

        • Tech Helpdesk
          Trusted Tech

          100+ Posts
          • Jul 2015
          • 112

          #5
          Re: c6500 has non responsive display

          Originally posted by service_man
          Try to clean with Alcohol and maybe is working.
          If not working, put the mouse on the USB port, and control everything with the mouse...

          Its better than pay 400$

          Regards
          If you can plug a usb mouse into the C6500 you are doing better than me !! You can on a C6000

          Comment

          • service_man
            Technician
            50+ Posts
            • Jul 2012
            • 59

            #6
            Re: c6500 has non responsive display

            Originally posted by Tech Helpdesk
            If you can plug a usb mouse into the C6500 you are doing better than me !! You can on a C6000
            Sorry but you are mistake.
            Put mous in USB port who is in the MACHINE and is working for sure!!!



            Regards

            Comment

            • service_man
              Technician
              50+ Posts
              • Jul 2012
              • 59

              #7
              Re: c6500 has non responsive display

              And YES... I like very much that technician who say that is the BEST in the world!!!

              Knowledge of technician can not be measured !!!!!

              Learn that

              Konica Minolta Professional Technician for PP machines.

              Comment

              • Tech Helpdesk
                Trusted Tech

                100+ Posts
                • Jul 2015
                • 112

                #8
                Re: c6500 has non responsive display

                Originally posted by service_man
                Sorry but you are mistake.
                Put mous in USB port who is in the MACHINE and is working for sure!!!



                Regards
                There is no usb on the operational panel arm like on the C6000 machines, yes there is one at the back of the machine which is the service port that we use for firmware updating, to be fair these machines we have replaced by now due to the age of them.

                Comment

                • service_man
                  Technician
                  50+ Posts
                  • Jul 2012
                  • 59

                  #9
                  Re: c6500 has non responsive display

                  Yes, put the mous in service port, an you have communication...

                  And you're sure for new machine... But, if costumer does not have to change machine only for display problem, technician is the that guy who must solve the problem on one way - CHEAP or EXPENSIVE.

                  Everybody love to have new machine, but some can not afford it.

                  I solve that problem to my costumer, and he is very happy, and he pay me for that trick!
                  Sound silly, but you must be a creative!

                  Regards friend

                  Comment

                  Working...