[Misc] C451 Bypass tray and non working bypass duplex

[mike86]

Is it possible to use duplex printing while I am using thick 2-3-4 from bypass ?

Working fine while in a tray, but as soon as loaded to bypass, set to it (paper set 2nd side or something like that) and printer simply prints everything as single sided (no matter if double side page from bypass or added cover pages from bypass, no warnins or errors)

[Mr Spock]

Re: C451 Bypass tray and non working bypass duplex

Thick 1 is the only auto duplex setting that should be allowed. Anything else should run side one then run side 2.

[mike86]

Re: C451 Bypass tray and non working bypass duplex

Thick 1 is the only auto duplex setting that should be allowed. Anything else should run side one then run side 2.

So no auto duplex from a bypass :///

[Mr Spock]

Re: C451 Bypass tray and non working bypass duplex

So no auto duplex from a bypass :///

Should be not auto duplex above thick 1 on any tray but....... I have seen the machine do it.